This is a very open-ended answer because, as the Actisense Active DST Module software can be updated, the list of special features can be extended or modified when required – by Actisense, or a particular customer...
Read More
This is a very open-ended answer because, as the Actisense Active DST Module’s software can be updated, the list of special features can be extended or modified when required – by Actisense, or a particular customer...
Read More
The Actisense Active DST Module was designed as the perfect solution to...
Read More
To be compatible with the DST-2, your transducer must be piezoelectric depth transducer crystal element using a three wire interface...
Read More
The typical maximum depth range of the DST-2 is 100 metres. The minimum detectable depth of the DST-2 is typically 0.5 metres – which makes it one of the best in the world. The true minimum depth that is detectable depends far more on the depth transducer than the DST-2 because it is the transducer 'ringing' that determines the earliest opportunity that a returning echo signal...
Read More
To get NMEA 2000 data from your legacy depth, speed or temperature instruments you may wish to use a DST-2 connected to the input of an NGW-1...
Read More
..The DST-2 frequency is dictated by the hardware components. Which means it is unfortunately not possible to change it by installing different firmware.
Read More
The CAN connections on the DST-2 were designed for an OEM customer that only required a basic CAN connection. As the DST-2 CAN connections do not meet the strict requirements of NMEA 2000, it is not possible to certify or market the DST-2 as an NMEA 2000 product...
Read More
