Yes, is the simple answer. The Actisense NMEA Autoswitch has been specifically designed to work together with the NMEA Multiplexer / Combiner to create a complete NMEA system solution...
Read More
The NMEA 0183 standard allows any suitably designed marine electronic device to share its gathered information with any other device on a vessel. Unfortunately, there is one very large drawback with this standard – only one device...
Read More
Yes, is the simple answer. The NMEA Autoswitch has been specifically designed to work together with the NMEA Multiplexer / Combiner to create a complete NMEA system solution...
Read More
The NMEA 0183 standard allows any suitably designed marine electronic device to share its gathered information with any other device on a vessel. Unfortunately, there is one very large drawback with this standard – only one device on a connected...
Read More
If you have already purchased an NDC-4, Actisense offers a ‘USB kit’ that can convert the standard NDC-4 into an NDC-4-USB. Please contact Actisense or your nearest distributor for pricing and availability of the ‘USB kit’...
Read More
By default, the Actisense NDC-4 uses the NMEA 0183 default communication speed of 4800 Baud (bits per second) for all of its NMEA input ports...
Read More
The Actisense NDC-4 have many useful features, among which is the ability to prioritise their input ports. The usefulness of this feature becomes apparent when the NMEA network is running over 50% loading/capacity (most setups). At this point...
Read More
Yes, is the simple answer. The Actisense NMEA Autoswitch (or an NDC-4 in ‘Autoswitch mode’) has been specifically designed to work together with the NMEA Multiplexer / Combiner NDC-4 (in ‘Combine Mode’) to create a complete NMEA system solution...
Read More
The NMEA 0183 standard allows any suitably designed marine electronic device to share its gathered information with any other device on a vessel. Unfortunately, there is one very large drawback with this standard – only one device...
Read More
On this page. USB Connection. Serial Connection. If you need to configure your NDC-4 using Control Centre, or if you wish to share your combined NMEA 0183 data with third party software, you will need to connect the NDC-4 to a PC or laptop. Here's how to do that...
Read More
