EMU-1 Engine Compatibility and Setup
In order to confirm that the EMU-1 will be compatible with your system, please identify the manufacturer of the gauges (VDO, Faria, US Marine, Yanmar etc…) and the range of values (40 to 140 degrees C, 0 to 5 Bar etc…). Once confirmed, refer to the table below to determine whether your gauges are compatible.
Note: The manufacturer of the engine is not relevant, it is the sender / gauge manufacturer that is important.
All of the senders/gauges on the current list are standard resistance senders/gauges. The EMU-1 is not yet compatible with constant current (4-20 mA) senders/gauges.
Tachometer gauges are not listed because the EMU-1 only needs to have the Pulses Per Revolution (PPR) entered into the configuration. The PPR can usually be found by contacting your engine manufacturer or in the engine documentation.
The EMU-1 can be connected in parallel to existing gauges or as a replacement for some or all of the gauges. The EMU-1 automatically detects whether a gauge is present or not and configures itself to provide a current feed to the sender where required.
If your gauge is not listed below, you can use the ‘Custom Gauge Manager’ in Toolkit to configure your own gauge. If you require further instructions for using the Custom Gauge Tool then please contact Technical Support.
Gauge Compatibility Tables
Fluid Level
Unit |
Min Range |
Max Range |
Voltage |
Market |
Manufacturer |
Ohms |
3 |
180 |
12/24 |
EU |
VDO |
Ohms |
3 |
180 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Ohms |
10 |
180 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Ohms |
10 |
180 |
12/24 |
EU |
Faria |
Ohms |
240 |
33 |
12/24 |
US |
VDO |
Ohms |
240 |
33 |
12/24 |
US |
Faria |
Ohms |
240 |
33 |
12 |
US |
US Marine (Faria) |
Pressure
Type |
Unit |
Min Range |
Max Range |
Voltage |
Market |
Manufacturer |
Engine Boost |
Bar |
0 |
2 |
12/24 |
EU |
VDO |
Engine Boost |
Bar |
0 |
5 |
12/24 |
EU |
VDO |
Engine Boost |
Bar |
0 |
8 |
12/24 |
EU |
VDO |
Engine Boost |
Bar |
0 |
10 |
12/24 |
EU |
VDO |
Engine Boost |
Bar |
0 |
10 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine Boost |
Bar |
0 |
10 |
12/24 |
EU |
VDO Viewline |
Engine Boost |
Bar |
0 |
10 |
12/24 |
EU |
Faria |
Engine Boost |
PSI |
0 |
80 |
12/24 |
US |
Faria |
Engine Boost |
PSI |
0 |
100 |
12/24 |
US |
Faria |
Engine Boost |
PSI |
0 |
80 |
12 |
US |
US Marine |
Engine Boost |
PSI |
0 |
150 |
12 |
US |
US Marine |
Engine Boost |
PSI |
0 |
80 |
12 |
US |
Datcon |
Engine Boost |
PSI |
0 |
100 |
12 |
US |
Datcon |
Engine Boost |
Bar |
0 |
3 |
12 |
EU |
Yanmar 6LP |
Engine Boost |
PSI |
0 |
100 |
12 |
US |
Murphy EGS21 |
Engine Coolant |
Bar |
0 |
5 |
12/24 |
EU |
VDO |
Engine Coolant |
Bar |
0 |
8 |
12/24 |
EU |
VDO |
Engine Coolant |
Bar |
0 |
10 |
12/24 |
EU |
VDO |
Engine Coolant |
Bar |
0 |
10 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine Coolant |
Bar |
0 |
10 |
12/24 |
EU |
VDO Viewline |
Engine Coolant |
Bar |
0 |
5 |
12/24 |
EU |
Faria |
Engine Coolant |
Bar |
0 |
10 |
12/24 |
EU |
Faria |
Engine Coolant |
PSI |
0 |
80 |
12/24 |
US |
Faria |
Engine Coolant |
PSI |
0 |
100 |
12/24 |
US |
Faria |
Engine Coolant |
PSI |
0 |
80 |
12 |
US |
US Marine |
Engine Coolant |
PSI |
0 |
150 |
12 |
US |
US Marine |
Engine Coolant |
PSI |
0 |
80 |
12 |
US |
Datcon |
Engine Coolant |
PSI |
0 |
100 |
12 |
US |
Datcon |
Engine Coolant |
PSI |
0 |
100 |
12 |
US |
Murphy EGS21 |
Engine Oil |
Bar |
0 |
5 |
12/24 |
EU |
VDO |
Engine Oil |
Bar |
0 |
8 |
12/24 |
EU |
VDO |
Engine Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO |
Engine Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO Viewline |
Engine Oil |
Bar |
0 |
5 |
12/24 |
EU |
Faria |
Engine Oil |
Bar |
0 |
10 |
12/24 |
EU |
Faria |
Engine Oil |
PSI |
0 |
80 |
12/24 |
US |
Faria |
Engine Oil |
PSI |
0 |
100 |
12/24 |
US |
Faria |
Engine Oil |
PSI |
0 |
80 |
12 |
US |
US Marine |
Engine Oil |
PSI |
0 |
150 |
12 |
US |
US Marine |
Engine Oil |
PSI |
0 |
80 |
12 |
US |
Datcon |
Engine Oil |
PSI |
0 |
100 |
12 |
US |
Datcon |
Engine Oil |
Bar |
0 |
8 |
12 |
EU |
Yanmar 6LP |
Engine Oil |
PSI |
0 |
100 |
12 |
US |
Murphy EGS21 |
Transmission Oil |
Bar |
0 |
5 |
12/24 |
EU |
VDO |
Transmission Oil |
Bar |
0 |
8 |
12/24 |
EU |
VDO |
Transmission Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO |
Transmission Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Transmission Oil |
Bar |
0 |
25 |
12/24 |
EU |
VDO |
Transmission Oil |
Bar |
0 |
28 |
12/24 |
EU |
VDO |
Transmission Oil |
Bar |
0 |
10 |
12/24 |
EU |
VDO Viewline |
Transmission Oil |
Bar |
0 |
5 |
12/24 |
EU |
Faria |
Transmission Oil |
Bar |
0 |
10 |
12/24 |
EU |
Faria |
Transmission Oil |
Bar |
0 |
25 |
12/24 |
EU |
Faria |
Transmission Oil |
PSI |
0 |
80 |
12/24 |
US |
Faria |
Transmission Oil |
PSI |
0 |
100 |
12/24 |
US |
Faria |
Transmission Oil |
PSI |
0 |
80 |
12 |
US |
US Marine |
Transmission Oil |
PSI |
0 |
150 |
12 |
US |
US Marine |
Transmission Oil |
PSI |
0 |
400 |
12 |
US |
US Marine |
Transmission Oil |
PSI |
0 |
80 |
12 |
US |
Datcon |
Transmission Oil |
PSI |
0 |
100 |
12 |
US |
Datcon |
Transmission Oil |
PSI |
0 |
100 |
12 |
US |
Murphy EGS21 |
Engine Fuel |
Bar |
0 |
2 |
12/24 |
EU |
VDO |
Engine Fuel |
Bar |
0 |
5 |
12/24 |
EU |
VDO |
Engine Fuel |
Bar |
0 |
8 |
12/24 |
EU |
VDO |
Engine Fuel |
Bar |
0 |
10 |
12/24 |
EU |
VDO |
Engine Fuel |
Bar |
0 |
10 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine Fuel |
Bar |
0 |
10 |
12/24 |
EU |
VDO Viewline |
Engine Fuel |
Bar |
0 |
5 |
12/24 |
EU |
Faria |
Engine Fuel |
Bar |
0 |
10 |
12/24 |
EU |
Faria |
Engine Fuel |
PSI |
0 |
80 |
12/24 |
US |
Faria |
Engine Fuel |
PSI |
0 |
100 |
12/24 |
US |
Faria |
Engine Fuel |
PSI |
0 |
80 |
12 |
US |
US Marine |
Engine Fuel |
PSI |
0 |
150 |
12 |
US |
US Marine |
Engine Fuel |
PSI |
0 |
80 |
12 |
US |
Datcon |
Engine Fuel |
PSI |
0 |
100 |
12 |
US |
Datcon |
Engine Fuel |
PSI |
0 |
100 |
12 |
US |
Murphy EGS21 |
Temperature
Type |
Unit |
Min Range |
Max Range |
Voltage |
Market |
Manufacturer |
Engine Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO |
Engine Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine Oil |
Deg. C |
50 |
150 |
12/24 |
EU |
VDO |
Engine Oil |
Deg. F |
100 |
250 |
12/24 |
US |
VDO |
Engine Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO Viewline |
Engine Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
Faria |
Engine Oil |
Deg. F |
100 |
250 |
12/24 |
US |
Faria |
Engine Oil |
Deg. F |
150 |
300 |
12/24 |
US |
Faria |
Engine Oil |
Deg. F |
100 |
250 |
12 |
US |
US Marine |
Engine Oil |
Deg. F |
100 |
240 |
12 |
US |
Datcon |
Engine Oil |
Deg. C |
40 |
120 |
12 |
EU |
Wema |
Engine Oil |
Deg. F |
100 |
250 |
12 |
US |
Murphy EGS21 |
Engine |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO |
Engine |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Engine |
Deg. C |
50 |
150 |
12/24 |
EU |
VDO |
Engine |
Deg. F |
100 |
250 |
12/24 |
US |
VDO |
Engine |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO Viewline |
Engine |
Deg. C |
40 |
120 |
12/24 |
EU |
Faria |
Engine |
Deg. F |
100 |
250 |
12/24 |
US |
Faria |
Engine |
Deg. F |
150 |
300 |
12/24 |
US |
Faria |
Engine |
Deg. F |
100 |
250 |
12 |
US |
US Marine |
Engine |
Deg. F |
100 |
240 |
12 |
US |
Datcon |
Engine |
Deg. C |
40 |
120 |
12 |
EU |
Wema |
Engine |
Deg. C |
40 |
120 |
12 |
EU |
Yanmar 6LP |
Engine |
Deg. F |
100 |
250 |
12 |
US |
Murphy EGS21 |
Transmission Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO |
Transmission Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO/Volvo (Ocean) |
Transmission Oil |
Deg. C |
50 |
150 |
12/24 |
EU |
VDO |
Transmission Oil |
Deg. F |
100 |
250 |
12/24 |
US |
VDO |
Transmission Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
VDO Viewline |
Transmission Oil |
Deg. C |
40 |
120 |
12/24 |
EU |
Faria |
Transmission Oil |
Deg. F |
100 |
250 |
12/24 |
US |
Faria |
Transmission Oil |
Deg. F |
150 |
300 |
12/24 |
US |
Faria |
Transmission Oil |
Deg. F |
100 |
250 |
12 |
US |
US Marine |
Transmission Oil |
Deg. F |
100 |
240 |
12 |
US |
Datcon |
Transmission Oil |
Deg. C |
40 |
120 |
12 |
EU |
Wema |
Transmission Oil |
Deg. F |
100 |
250 |
12 |
US |
Murphy EGS21 |
Tilt & Trim
Engine Manufacturer/ Trim Gauge/ Sender |
Common Compatibility | Resistance (Ohms) | ||||
|
Type | Down (0%) | Mid (50%) | Up (100%) | ||
Mercury / Force |
A | 10 | 38.7 | 160 | ||
Volvo SX Cobra, SX (HU Mode), SX (NC Mod), Volvo DP-S (NC Mod) |
A | 11 | – | 146 | ||
Volvo DP |
A | 10 | – | 180 | ||
Yamaha 2001 and newer |
A | 10 | 150 | 280 | ||
Johnson / Evenrude Outboard |
B | 88 | 44 | 10 | ||
Suzuki 1999 and newer |
B | 88 | 44 | 2.5 | ||
OMC Cobra Stern |
C | 11 | 29.5 | 70 | ||
OMC Sea Stern Drive |
C | 10 | 44 | 88 | ||
Volvo SX (MD Mod) |
C | 3 | – | 70 | ||
Yamaha 1996 |
Y | 100 | 240 | 450 | ||
Yamaha 1997 – 2000 |
Y | 100 | 330 | 550 |
Supported NMEA 2000 Data (PGNs)
The EMU-1 will transmit the converted analogue data from your engines gauges/senders as standard NMEA 2000 engine data PGNs, making the device compatible with MFD’s/PC software that also use these standard NMEA 2000 PGNs. To ensure your engine monitoring display is compatible for use with the EMU-1, please check which NMEA 2000 PGN’s your display supports against the PGN list below.
PGN |
PGN Name |
Receive (Rx) |
Transmit (Tx) |
Tx Rate |
59392 |
ISO Acknowledge |
Yes |
Yes |
N/A |
59904 |
ISO Request |
Yes |
No |
N/A |
60160 |
ISO Transport protocol, Data Transfer |
Yes |
Yes |
N/A |
60416 |
ISO Transport Protocol, Connection Management |
Yes |
Yes |
N/A |
60928 |
ISO Address Claim |
Yes |
Yes |
N/A |
65240 |
ISO Commanded Address |
Yes |
Yes |
N/A |
126208 |
NMEA Request/Command Acknowledgement |
Yes |
Yes |
N/A |
126464 |
RX and Tx PGN Lists |
No |
Yes |
N/A |
126720 |
Propriety Fast-Packet |
Yes |
Yes |
N/A |
126996 |
Product Information |
No |
Yes |
N/A |
126998 |
Configuration Information |
No |
Yes |
N/A |
127488 |
Engine Parameters, Rapid Update |
No |
Yes |
0.1 Seconds |
127489 |
Engine Parameters, Dynamic |
No |
Yes |
0.5 Seconds |
127493 |
Transmission Parameters, Dynamic* |
No |
Yes |
0.5 Seconds |
127505 |
Fluid Level* |
No |
Yes |
2.5 Seconds |
127508 |
Battery Status |
No |
Yes |
1.5 Seconds |
*Not enabled by default. Can be configured using Toolkit.
Dual Station Senders
The EMU-1 is compatible with both single and dual station senders.
A dual station sender must always have two gauges connected to it: the EMU-1 cannot replace one or both of those gauges. If it is required to remove one or both gauges, the dual station sender will need to be replaced with a single station sender.
Recommended Wire Gauge
The recommended wire to use between the gauge/sensor and the EMU-1 connectors is a minimum of 24 AWG (0.5mm diameter).
Further Reading
For more information on NMEA 2000 and how it works, please download our free guide to NMEA 2000 networking here: https://actisense.com/complete-guide-to-building-an-nmea-2000-network/