Reply To: NGW-1 possible error

[Josh Keets]

Hi there!

That’s correct. If you purchased an NGW-1-ISO rather than an NGW-1-AIS, then it will be defaulted to the standard conversions at 4800 baud rate.

The NGW-1 can be reconfigured in Actisense Toolkit. There is a default config available that will change the device to 38400 baud, and enable AIS conversions.

Details on connecting the NGW-1 to a PC can be found in the user manual, and instructions on configuring the NGW-1 can be found here;

Configuring the NGW-1 using Toolkit

Thanks!

Josh